This is one aspect that you have to perform promptly in order to add more efficiency to your motorcycle: Changing its motor oil. Every rider should know how to change the oil themselves since it is helpful if you do not have a mechanic available.  Motorcycles require motor oil, which is significant in regulating the friction of the numerous parts of the engine, not to mention helping prevent the given engine from heating. However,  motor oil does wear out with time and may no longer provide the engine with the protection it needs; hence, it needs to be changed at regular intervals.

When Should You Change Motor Oil?

The time interval for changing oil is determined by the type of motorcycle, conditions of motorcycle use, and the type of oil utilized: 

• Conventional Oil: Must be changed after every 3000 to 5000 miles or every third to sixth month.
• Synthetic Oil: Replace them every 5000 to 7500 miles or every half a year based on the recommendations of the manufacturers to be followed.

Step-by-Step Guide to Changing Motor Oil

1. Prepare Your Motorcycle

Always park your motorcycle on level ground. Prime the engine then allow the engine to operate for some time to ensure that the internal parts are warmed up. This makes the oil hot and easy to sip out.

2. Drain the Old Oil

Place the oil catch pan underneath the drain plug to collect the old oil. With the suitable wrench, proceed to unscrew and undo the drain plug slowly and steadily. Ensure that the old oil seeps to the bottom of the container through the funnel and drains off fully into the pan.

3. Replace the Oil Filter (If Applicable)

Using the oil filter wrench, you can remove the old oil filter. Pour a small quantity of new oil over the rubber gasket of the new filter. Manually twist the new filter and tighten it, but do not tighten it too much.

4. Replace the Drain Plug

Clean around the drain plug and any debris that may be stuck on the surface around the spot. Tighten the drain plug back into position sufficiently but not overly tight.

5. Add New Motor Oil

Put a funnel over the oil filler opening to ensure that no spillage occurs. Gradually add new motor oil following the manufacturer’s recommendations provided in the owner’s manual.

6. Check Oil Level

After refilling, let the engine run for a minute to enable the new oil to circulate within the engine. Power off the engine and allow the oil to drift for a while. The first thing to do is to use the dipstick and check the amount of oil using it. Add more oil if needed.

7. Dispose of Old Oil Properly

One must not pump out the old oil to the sewer or throw it into the trash. Many facilities are available to dispose of used oil, such as the recycling centre or auto parts store, which has the amenities for accepting such products.

Final Tips for Maintaining Your Motorcycle’s Oil System

1. Keep Records

Note down the date you made your oil change and the number of kilometres that have been recorded since the last change was done. It is helpful to know when the next change is due to help identify critical transitional periods that have to be managed.

2. Regular Inspections

If one is planning a long-distance journey, it’s advisable to check the oil level. Top up if needed. 

3. Use Quality Motor Oil

Choose the right kind and grade of motorcycle motor oil that is recommended in the motorcycle user manual.

Conclusion

One of the most basic yet significant operations that are closely similar to the power and longevity of the motorcycle is the change of motor oil. One of the suggestions could be 10W30 synthetic engine oil, which offers more use and value in motorcycle engine systems. It also helps the engine to be durable. Ultimately, proper maintenance keeps your riding experience good, thus providing the best experience on the whole trip.